Appearance

Gateway SDK ​

Build and debug your IQD-GW04 (Industrial GW) application using Gateway SDK Yocto package.

Industrial GW devices ​

The embedded Linux image based on the Yocto project is optional for the device. It features same basic set of the software for the IQRF and IP connectivity as Armbian image, plus support for Mender OTA updates and remote management. The SD card is mounted as read-only which is also important attribute. The base image can be extended based on the specific customer requirements.

SDK installation ​

bash
# download
dev@ubuntu:~/iqrf-gw-sdk$ wget https://dl.iqrf.org/industrial/yocto/iqd-gw-04_yocto-kirkstone_sdk_v15x_20230118.sh

# setup
dev@ubuntu:~/iqrf-gw-sdk$ ./iqd-gw-04_yocto-kirkstone_sdk_v15x_20230118.sh
IQRF-GW-OS INDUSTRIAL SDK installer version 1.5.x
=================================================
Enter target directory for SDK (default: /opt/iqrf-gw-os/1.5.x):
You are about to install the SDK to "/opt/iqrf-gw-os/1.5.x". Proceed [Y/n]? y
[sudo] password for spinarr:
Extracting SDK...........................................................done
Setting it up...done
SDK has been successfully set up and is ready to be used.
Each time you wish to use the SDK in a new shell session, you need to source the environment setup script e.g.
$ . /opt/iqrf-gw-os/1.5.x/environment-setup-armv7vet2hf-neon-poky-linux-gnueabi
dev@ubuntu:~/iqrf-gw-sdk$

GW Daemon build ​

bash
dev@ubuntu:~/iqrf-gw-sdk$
# set dev environment
. /opt/iqrf-gw-os/1.5.x/environment-setup-armv7vet2hf-neon-poky-linux-gnueabi

# shape
git clone https://github.com/logimic/shape
cd shape
git checkout v1.1.0
git submodule init && git submodule update
# rapidjson patch
wget https://gitlab.iqrf.org/open-source/meta-iqrf/-/blob/master/meta-iqrf-core/recipes-iqrf/shape/shape/0003-Update-rapidjson-to-8f4c021fa2f1e001d2376095928fc053.patch
git apply 0003-Update-rapidjson-to-8f4c021fa2f1e001d2376095928fc053.patch
./buildMake.sh

# shapeware
git clone https://github.com/logimic/shapeware
cd shapeware
git checkout v1.1.0
git submodule init && git submodule update
./buildMake.sh

# iqrf gw daemon
git clone https://gitlab.iqrf.org/open-source/iqrf-gateway-daemon
cd iqrf-gateway-daemon
git checkout v2.4.0
git submodule init && git submodule update
./buildMake.sh

Customer extension ​

Adding your application into the base image.

bash
roota_path="/mnt/rootA"
rootb_path="/mnt/rootB"

# mount image first
loop_device=$( losetup --find --show --partscan ${BASEIMAGE})

mkdir -p ${roota_path} ${rootb_path}

# mount partitions
mount "${loop_device}p2" ${roota_path}
mount "${loop_device}p3" ${rootb_path}

# copy directory structure of customer project to target rootfs
cp -rf ${USERDIR} ${roota_path} ${rootb_path}
sync

# cleanup
losetup -D $loop_device