Daemon API v2.4.x

IQRF Generic

Generic messages are able to handle any DPA packet.

Raw `iqrfRaw`

Schema	Example

RawHdp `iqrfRawHdp`

Schema	Example

IQRF Standard

Standard messages have been designed according to IQRF Standard and DPA protocol.

Binary output

Enumerate `iqrfBinaryoutput_Enumerate`IQRF Standard doc

Schema	Example

Set output `iqrfBinaryoutput_SetOutput`IQRF Standard doc

Schema	Example

DALI

Send commands `iqrfDali_SendCommands`

Schema	Example

Send commands asynchronously `iqrfDali_SendCommandsAsync`

Schema	Example

FRC `iqrfDali_Frc`

Schema	Example

Light

Enumerate `iqrfLight_Enumerate`

Schema	Example

Set power `iqrfLight_SetPower`

Schema	Example

Increment power `iqrfLight_IncrementPower`

Schema	Example

Decrement power `iqrfLight_DecrementPower`

Schema	Example

Sensor

Enumerate `iqrfSensor_Enumerate`IQRF Standard doc

Schema	Example

Read sensors with types `iqrfSensor_ReadSensorsWithTypes`IQRF Standard doc

Schema	Example

FRC `iqrfSensor_Frc`IQRF Standard doc

Schema	Example

Embed Explore

Enumerate `iqrfEmbedExplore_Enumerate`DPA doc

Schema	Example

Peripheral information `iqrfEmbedExplore_PeripheralInformation`DPA doc

Schema	Example

More peripheral information `iqrfEmbedExplore_MorePeripheralsInformation`DPA doc

Schema	Example

Embed Coordinator

Address information `iqrfEmbedCoordinator_AddrInfo`DPA doc

Schema	Example

Get discovered devices `iqrfEmbedCoordinator_DiscoveredDevices`DPA doc

Schema	Example

Get bonded devices `iqrfEmbedCoordinator_BondedDevices`DPA doc

Schema	Example

Clear all bonds `iqrfEmbedCoordinator_ClearAllBonds`DPA doc

Schema	Example

Bond node `iqrfEmbedCoordinator_BondNode`DPA doc

Schema	Example

Remove bond `iqrfEmbedCoordinator_RemoveBond`DPA doc

Schema	Example

Discovery `iqrfEmbedCoordinator_Discovery`DPA doc

Schema	Example

Set DPA parameters `iqrfEmbedCoordinator_SetDpaParams`DPA doc

Schema	Example

Set hops `iqrfEmbedCoordinator_SetHops`DPA doc

Schema	Example

Discovery data `iqrfEmbedCoordinator_DiscoveryData`Removed in DPA v4.0.0

Schema	Example

Backup `iqrfEmbedCoordinator_Backup`DPA doc

Schema	Example

Restore `iqrfEmbedCoordinator_Restore`DPA doc

Schema	Example

Authorize bond `iqrfEmbedCoordinator_AuthorizeBond`DPA doc

Schema	Example

Read remotely bonded MID `iqrfEmbedCoordinator_ReadRemotelyBondedMid`Removed in DPA v4.0.0

Schema	Example

Clear remotely bonded MID `iqrfEmbedCoordinator_ClearRemotelyBondedMid`Removed in DPA v4.0.0

Schema	Example

Enable remote bonding `iqrfEmbedCoordinator_EnableRemoteBonding`Removed in DPA v4.0.0

Schema	Example

SmartConnect `iqrfEmbedCoordinator_SmartConnect`DPA doc

Schema	Example

Set MID `iqrfEmbedCoordinator_SetMID`DPA doc

Schema	Example

Embed Node

Read `iqrfEmbedNode_Read`DPA doc

Schema	Example

Remove bond `iqrfEmbedNode_RemoveBond`DPA doc

Schema	Example

Backup `iqrfEmbedNode_Backup`DPA doc

Schema	Example

Restore `iqrfEmbedNode_Restore`DPA doc

Schema	Example

Read remotely bonded MID `iqrfEmbedNode_ReadRemotelyBondedMid`Removed in DPA v4.0.0

Schema	Example

Clear remotely bonded MID `iqrfEmbedNode_ClearRemotelyBondedMid`Removed in DPA v4.0.0

Schema	Example

Enable remote bonding `iqrfEmbedNode_EnableRemoteBonding`Removed in DPA v4.0.0

Schema	Example

Validate bonds `iqrfEmbedNode_ValidateBonds`DPA doc

Schema	Example

Embed OS

Read `iqrfEmbedOs_Read`DPA doc

Schema	Example

Batch `iqrfEmbedOs_Batch`DPA doc

Schema	Example

Selective batch `iqrfEmbedOs_SelectiveBatch`DPA doc

Schema	Example

Reset `iqrfEmbedOs_Reset`DPA doc

Schema	Example

Restart `iqrfEmbedOs_Restart`DPA doc

Schema	Example

Run RFPGM `iqrfEmbedOs_Rfpgm`DPA doc

Schema	Example

Set security `iqrfEmbedOs_SetSecurity`DPA doc

Schema	Example

Sleep `iqrfEmbedOs_Sleep`DPA doc

Schema	Example

Load code `iqrfEmbedOs_LoadCode`DPA doc

Schema	Example

Read configuration `iqrfEmbedOs_ReadCfg`DPA doc

Schema	Example

Write configuration `iqrfEmbedOs_WriteCfg`DPA doc

Schema	Example

Write configuration byte `iqrfEmbedOs_WriteCfgByte`DPA doc

Schema	Example

Test RF signal `iqrfEmbedOs_TestRfSignal`DPA doc

Schema	Example

Factory settings `iqrfEmbedOs_FactorySettings`DPA doc

Schema	Example

Indicate `iqrfEmbedOs_Indicate`DPA doc

Schema	Example

Embed EEPROM

Read `iqrfEmbedEeprom_Read`DPA doc

Schema	Example

Write `iqrfEmbedEeprom_Write`DPA doc

Schema	Example

Embed EEEPROM

Read `iqrfEmbedEeeprom_Read`DPA doc

Schema	Example

Write `iqrfEmbedEeeprom_Write`DPA doc

Schema	Example

Embed RAM

Read `iqrfEmbedRam_Read`DPA doc

Schema	Example

Write `iqrfEmbedRam_Write`DPA doc

Schema	Example

Embed SPI Removed in DPA v4.15.0

Write and read `iqrfEmbedSpi_WriteRead`DPA docRemoved in DPA v4.15.0

Schema	Example

Embed LEDR

Set `iqrfEmbedLedr_Set`DPA doc

Schema	Example

Get `iqrfEmbedLedr_Get`Removed in DPA v3.0.3

Schema	Example

Pulse `iqrfEmbedLedr_Pulse`DPA doc

Schema	Example

Flashing `iqrfEmbedLedr_Flashing`DPA doc

Schema	Example

Embed LEDG

Set `iqrfEmbedLedg_Set`DPA doc

Schema	Example

Get `iqrfEmbedLedg_Get`Removed in DPA v3.0.3

Schema	Example

Pulse `iqrfEmbedLedg_Pulse`DPA doc

Schema	Example

Flashing `iqrfEmbedLedg_Flashing`DPA doc

Schema	Example

Embed IO

Direction `iqrfEmbedIo_Direction`DPA doc

Schema	Example

Set `iqrfEmbedIo_Set`DPA doc

Schema	Example

Get `iqrfEmbedIo_Get`DPA doc

Schema	Example

Embed Thermometer

Read `iqrfEmbedThermometer_Read`DPA doc

Schema	Example

Embed UART

Open `iqrfEmbedUart_Open`DPA doc

Schema	Example

Close `iqrfEmbedUart_Close`DPA doc

Schema	Example

Write and read `iqrfEmbedUart_WriteRead`DPA doc

Schema	Example

Clear, write and read `iqrfEmbedUart_ClearWriteRead`DPA doc

Schema	Example

Embed FRC

Send `iqrfEmbedFrc_Send`DPA doc

Schema	Example

Extra result `iqrfEmbedFrc_ExtraResult`DPA doc

Schema	Example

Send selective `iqrfEmbedFrc_SendSelective`DPA doc

Schema	Example

Set parameters `iqrfEmbedFrc_SetParams`DPA doc

Schema	Example

IQMESH Network

Services that ease the task of working with IQMESH network.
They are composed of more than single DPA transaction (request-confirmation-response) in most of the cases.
They are also integrating information from IQRF Repository.
They are inspired by the services available in IQRF IDE - IQMESH Network Manager.

IQRF Network New in v2.4.0

Ping `iqmeshNetwork_Ping`

Schema	Example

Restart `iqmeshNetwork_Restart`

Schema	Example

IQRF Bonding

Bond node locally `iqmeshNetwork_BondNodeLocal`

Schema	Example

SmartConnect `iqmeshNetwork_SmartConnect`

Schema	Example

Remove bond `iqmeshNetwork_RemoveBond`

Schema	Example

Remove bond only from coordinator `iqmeshNetwork_RemoveBondOnlyInC`

Schema	Example

AutoNetwork `iqmeshNetwork_AutoNetwork`

Schema	Example

IQRF Enumeration

Enumerate device `iqmeshNetwork_EnumerateDevice`

Schema	Example

IQRF Configuration

Read TR configuration `iqmeshNetwork_ReadTrConf`

Schema	Example

Write TR configuration `iqmeshNetwork_WriteTrConf`

Schema	Example

IQRF DPA Parameters New in v2.4.0

DPA parameters `iqmeshNetwork_DpaValue`

Schema	Example

DPA hops `iqmeshNetwork_DpaHops`

Schema	Example

FRC parameters `iqmeshNetwork_FrcParams`

Schema	Example

IQRF Backup and Restore

Backup `iqmeshNetwork_Backup`

Schema	Example

Restore `iqmeshNetwork_Restore`

Schema	Example

IQRF OTA

Upload `iqmeshNetwork_OtaUpload`

Schema	Example

IQRF Maintenance New in v2.4.0

FRC response time `iqmeshNetwork_MaintenanceFrcResponseTime`

Schema	Example

Test RF signal `iqmeshNetwork_MaintenanceTestRF`

Schema	Example

Resolve duplicated addresses `iqmeshNetwork_MaintenanceDuplicatedAddresses`

Schema	Example

Resolve inconsistent MIDs in Coordinator `iqmeshNetwork_MaintenanceInconsistentMIDsInCoord`

Schema	Example

Resolve unused prebonded nodes `iqmeshNetwork_MaintenanceUselessPrebondedNodes`

Schema	Example

Daemon Management

Exit `mngDaemon_Exit`

Schema	Example

Mode `mngDaemon_Mode`

Schema	Example

Reload coordinator `mngDaemon_ReloadCoordinator`New in v2.4.0

Schema	Example

Update cache `mngDaemon_UpdateCache`New in v2.4.0

Schema	Example

Version `mngDaemon_Version`

Schema	Example

Daemon Configuration

Component `cfgDaemon_Component`

Schema	Example

Daemon Scheduler

Add task `mngScheduler_AddTask`

Schema	Example

Edit task `mngScheduler_EditTask`New in v2.4.0

Schema	Example

Get task `mngScheduler_GetTask`

Schema	Example

List tasks `mngScheduler_List`

Schema	Example

Remove all tasks `mngScheduler_RemoveAll`

Schema	Example

Remove task `mngScheduler_RemoveTask`

Schema	Example

Start task `mngScheduler_StartTask`New in v2.4.0

Schema	Example

Stop task `mngScheduler_StopTask`New in v2.4.0

Schema	Example

Daemon Information New in v2.4.0

Enumeration `infoDaemon_Enumeration`

Schema	Example

Get nodes `infoDaemon_GetNodes`

Schema	Example

Get sensors `infoDaemon_GetSensors`

Schema	Example

Get binary outputs `infoDaemon_GetBinaryOutputs`

Schema	Example

Get lights `infoDaemon_GetLights`

Schema	Example

Get DALI devices `infoDaemon_GetDalis`

Schema	Example

Get metadata assigned to MID `infoDaemon_GetMidMetaData`

Schema	Example

Get metadata assigned to bonded node `infoDaemon_GetNodeMetaData`

Schema	Example

Annotate messages with metadata `infoDaemon_MidMetaDataAnnotate`

Schema	Example

Handle orphaned MIDs `infoDaemon_OrphanedMids`

Schema	Example

Reset `infoDaemon_Reset`

Schema	Example

Set metadata to MID `infoDaemon_SetMidMetaData`

Schema	Example

Set metadata to bonded node `infoDaemon_SetNodeMetaData`

Schema	Example

Daemon Notification

Daemon state notifications related to interfaces, modes via WebSocket channel on port 1438.

Monitor `ntfDaemon_Monitor`

Schema	Example

Daemon API v2.4.x ​

IQRF Generic ​

Raw iqrfRaw​

RawHdp iqrfRawHdp​

IQRF Standard ​

Binary output ​

Enumerate iqrfBinaryoutput_EnumerateIQRF Standard doc​

Set output iqrfBinaryoutput_SetOutputIQRF Standard doc​

DALI ​

Send commands iqrfDali_SendCommands​

Send commands asynchronously iqrfDali_SendCommandsAsync​

FRC iqrfDali_Frc​

Light ​

Enumerate iqrfLight_Enumerate​

Set power iqrfLight_SetPower​

Increment power iqrfLight_IncrementPower​

Decrement power iqrfLight_DecrementPower​

Sensor ​

Enumerate iqrfSensor_EnumerateIQRF Standard doc​

Read sensors with types iqrfSensor_ReadSensorsWithTypesIQRF Standard doc​

FRC iqrfSensor_FrcIQRF Standard doc​

Embed Explore ​

Enumerate iqrfEmbedExplore_EnumerateDPA doc​

Peripheral information iqrfEmbedExplore_PeripheralInformationDPA doc​

More peripheral information iqrfEmbedExplore_MorePeripheralsInformationDPA doc​

Embed Coordinator ​

Address information iqrfEmbedCoordinator_AddrInfoDPA doc​

Get discovered devices iqrfEmbedCoordinator_DiscoveredDevicesDPA doc​

Get bonded devices iqrfEmbedCoordinator_BondedDevicesDPA doc​

Clear all bonds iqrfEmbedCoordinator_ClearAllBondsDPA doc​

Bond node iqrfEmbedCoordinator_BondNodeDPA doc​

Remove bond iqrfEmbedCoordinator_RemoveBondDPA doc​

Discovery iqrfEmbedCoordinator_DiscoveryDPA doc​

Set DPA parameters iqrfEmbedCoordinator_SetDpaParamsDPA doc​

Set hops iqrfEmbedCoordinator_SetHopsDPA doc​

Discovery data iqrfEmbedCoordinator_DiscoveryDataRemoved in DPA v4.0.0​

Backup iqrfEmbedCoordinator_BackupDPA doc​

Restore iqrfEmbedCoordinator_RestoreDPA doc​

Authorize bond iqrfEmbedCoordinator_AuthorizeBondDPA doc​

Read remotely bonded MID iqrfEmbedCoordinator_ReadRemotelyBondedMidRemoved in DPA v4.0.0​

Clear remotely bonded MID iqrfEmbedCoordinator_ClearRemotelyBondedMidRemoved in DPA v4.0.0​

Enable remote bonding iqrfEmbedCoordinator_EnableRemoteBondingRemoved in DPA v4.0.0​

SmartConnect iqrfEmbedCoordinator_SmartConnectDPA doc​

Set MID iqrfEmbedCoordinator_SetMIDDPA doc​

Embed Node ​

Read iqrfEmbedNode_ReadDPA doc​

Remove bond iqrfEmbedNode_RemoveBondDPA doc​

Backup iqrfEmbedNode_BackupDPA doc​

Restore iqrfEmbedNode_RestoreDPA doc​

Read remotely bonded MID iqrfEmbedNode_ReadRemotelyBondedMidRemoved in DPA v4.0.0​

Clear remotely bonded MID iqrfEmbedNode_ClearRemotelyBondedMidRemoved in DPA v4.0.0​

Enable remote bonding iqrfEmbedNode_EnableRemoteBondingRemoved in DPA v4.0.0​

Validate bonds iqrfEmbedNode_ValidateBondsDPA doc​

Embed OS ​

Read iqrfEmbedOs_ReadDPA doc​

Batch iqrfEmbedOs_BatchDPA doc​

Selective batch iqrfEmbedOs_SelectiveBatchDPA doc​

Reset iqrfEmbedOs_ResetDPA doc​

Restart iqrfEmbedOs_RestartDPA doc​

Run RFPGM iqrfEmbedOs_RfpgmDPA doc​

Set security iqrfEmbedOs_SetSecurityDPA doc​

Sleep iqrfEmbedOs_SleepDPA doc​

Load code iqrfEmbedOs_LoadCodeDPA doc​

Read configuration iqrfEmbedOs_ReadCfgDPA doc​

Write configuration iqrfEmbedOs_WriteCfgDPA doc​

Write configuration byte iqrfEmbedOs_WriteCfgByteDPA doc​

Test RF signal iqrfEmbedOs_TestRfSignalDPA doc​

Factory settings iqrfEmbedOs_FactorySettingsDPA doc​

Indicate iqrfEmbedOs_IndicateDPA doc​

Embed EEPROM ​

Read iqrfEmbedEeprom_ReadDPA doc​

Write iqrfEmbedEeprom_WriteDPA doc​

Embed EEEPROM ​

Read iqrfEmbedEeeprom_ReadDPA doc​

Write iqrfEmbedEeeprom_WriteDPA doc​

Embed RAM ​

Read iqrfEmbedRam_ReadDPA doc​

Write iqrfEmbedRam_WriteDPA doc​

Embed SPI Removed in DPA v4.15.0​

Write and read iqrfEmbedSpi_WriteReadDPA docRemoved in DPA v4.15.0​