Start - Gateway IQRF

Send DPA packet

Any IQRF DPA packet can be sent using this page. There are predefined macros to select particular DPA packet.
The user can select device address by enabling Set own NADR.
An user timeout to wait for DPA response can be selected by enabling Set own DPA timeout.
Send DPA packet

Send JSON request

Any IQRF JSON request can be sent using this page. The best is to open another tab in browser using button Show API documentation and copy any request from displayed examples on API page.

Send JSON request

Coordinator upload

IQRF DPA custom handler (.hex) and plugin (.iqrf) can be uploaded to the coordinator TR module in the gateway. IQRF DPA plugin is automatically preselected for the given IQRF OS version and downloaded from IQRF repository.
To upload any IQRF DPA handler or plugin to the devices in the network DPA Over The Air upload must be used along with the wizard in IQRF IDE. Switch gateway to service mode, connect IQRF IDE via UDP and follow the steps.
Be aware that DPA plugin upload takes tens of seconds!
TR upload

TR configuration

TR module configuration can be shown/changed using this page.
The coordinator address 0 is selected by default. Using Read button address configuration is read from the given device address 0-239. The Write button writes new configuration to previously selected device or to coordinator by default.
TR configuration

Network manager

The network manager can be used to perform necessary tasks in order to create IQMESH network such as device bonding, discovery, ping and enumeration. There is a support for the Local bonding e.g. via button and for the Smart connect via code.

Network manager

Standard manager

The standard manager can be used to work with IQRF Standard devices such as IQRF Sensor, BO, Light and Dali.

Standard manager